XPIA BAO WC61 & 68 Basic Maintenance and Troubleshooting

On 2015/04/03 between about 1500-1600 MDT, Paul Quelet serviced the WCv1 LiDARs running at the BAO during XPIA. Next day (2015/04/04), have checked both systems remotely. Seem to be taking more vertical data and have stronger cell signals.

WC61 (NCAR):

• 2149 45-55 seconds (approximately), wiped lens manually. Should be NaNs in data files.
• Lens wipe seems to have helped LiDAR remotely sense more vertical levels? (So far this seems to be the case...
• Still running very strong.
• Usually transferring data (although not always full file size).
• Strong Verizon dongle signal (usually ~3 bars).
• System requested Verizon software update upon login 2015/04/04. After saying "Yes", was not able to update, and said update will come back in two days. Should happen ~0830 MDT 2015/04/06?
• Sun cover on.

WC68 (CU):

• 2213-2215 installed WC49 cover on top of WC68. Put Verizon dongle upward to extend length and wiped lens off manually.
• Lens wipe seems to have helped LiDAR remotely sense more vertical levels? (So far this seems to be the case...
• Running well.
• Manually downloaded data from 2015/03/20 to 2015/04/03 through remote desktop connection.
• Has had trouble transferring data remotely or allowing TeamViewer login.
• 2015/04/04 0000 UTC FTP data transfer seemed much improved with dongle position change.

Yes, I am aware that this is the non-matching sun cover number on the WC. However, it was quite a feat of strength to get the cover out of the Leosphere box and transport it to the site alone.