XPIA A2e BAO Windcubes Status Update

LiDAR supersite below inner south guy wire at the BAO is quite crowded with 3 CU Leosphere/NRG v1 Windcube LiDARs, AXYS scanning LiDAR, and a new Leosphere/NRG v2 profiling LiDAR installed on Thursday 12 March by Welly Cobden and Julie Lundquist.

Summary of past few days of WC v1 LiDARs:

WC49:

• Appears to be taking data right now...? (Confirm Julie?)
• Cannot log into this system with ethernet cable in person, perhaps because of a bad port.
• Previous alarm files noted laser errors.
• To Do: Welly Cobden suggests take keyboard, mouse, and external monitor into field with side panel open to troubleshoot computer ports at some point

WC61:

• Has been continuously taking data this week.
• Have had trouble logging into it sometimes with TeamViewer, but problem seems to have worked itself out.
• Intermittent sound coming from side had to do with temperature controlling the system. Would probably stop of the heat dessicant was removed, but will not as continues to run fine taking data.

WC68: 

• Logged on today (14 March 2015) and discovered the need for Verizon software update.
• Restarted TeamViewer, should be online just fine.
• Previous issue with the stage rotating had to do with a setting of how far off the stage can get over time as the optical head moves. Was set to a very low value. Welly Cobden changed it to a slightly higher value. Should hopefully remove optical head stoppage and scanner errors.
• As a result, some missing data from earlier this week (9 & 10 March 2015).

(Quelet)